PP/PET Fresh Tray With Absorbent Pad

This is a three-layer PP/PET food tray with an absorbent pad sealed into the base. Meat, poultry and fish sit on the pad instead of in their own juices, so the surface of the product stays dry and the pack reads clean under the film. The tray is rigid enough to run on automatic wrapping and sealing lines, and it keeps its shape when a case of them is stacked on a pallet.
Most drip loss in a meat pack happens in the first 24 hours. Without a pad that liquid pools in the corners, discolours the meat where it touches the tray, and by the time the pack reaches the shelf there is a puddle under the film. The pad takes it up at the point where it appears rather than letting it travel around the pack, which is why a meat tray built this way still looks presentable after a week in the case.
How the Absorbent Pad Works
The pad is a non-woven absorbent sheet cut to the footprint of the tray base. It takes up blood and water as they leave the product and holds them in the fibre, so they are not squeezed back out under the weight of the meat. Two things follow from that. The product no longer sits in liquid, which is what turns a bright cut dull and softens the texture on the shelf. And the liquid stays where it landed instead of running to the lowest corner, so the pack still looks right when the retailer turns it over or stands it up in the case.
The pad also carries the printing. Where a pack needs a brand, a weight band or a cooking suggestion, that goes on the pad rather than on the film, which keeps the film clear and leaves the product fully visible.


Three Layers, and What Each One Does
The sheet is co-extruded in three layers rather than blended from a single resin, and each layer is there for a reason.
- Top layer, PP/PET — the food-contact surface. Food grade, odourless and sealable to the lid film.
- Middle layer, PP with calcium carbonate — this is where the stiffness comes from. The filler raises the flexural modulus, so a thinner sheet carries the same load and the tray does not bow when it is picked up by one corner.
- Bottom layer, PP/PET — gives the tray a closed, printable base and keeps the filler away from the food-contact side.
Keeping the calcium carbonate in the middle is the whole point of the structure: the tray gains rigidity without putting the filler against the product, which a single blended layer could not do.


PP, PET and Self-Absorbent Versions
Three versions are made on the same tooling, so a pack can be switched without changing the carton or the sealing line.
- PP with absorbent pad — the standard. Black, white or coloured, and the version used for most meat and poultry packs.
- PET with absorbent pad — clear, for packs where the product has to be visible through the base.
- Self-absorbent tray — supplied without a separate pad, for lines that want one less component to load.
Size, depth and colour are made to order in all three.
Where Meat Trays and Food Trays Are Used
It is a meat tray first: butcher and processor lines packing beef, pork, lamb and poultry, and the supermarket case pack where the tray becomes the shelf pack. The same food tray runs fish and seafood, from whole fish to fillets and shrimp, and fresh produce or deli items where surface moisture has to be controlled rather than left to pool.
Specifications
| Specification | Detail |
|---|---|
| Product name | Three-layer PP/PET tray with integrated absorbent pad |
| Material | PP/PET (top and bottom layers), PP with calcium carbonate (middle layer) |
| Product size | 225 × 173 × 33.3 mm / 225 × 173 × 43.4 mm / 220 × 170 × 60 mm / 145 × 127 × 66 mm — custom sizes available |
| Product weight | 22 g / 24 g / 26 g, or to your drawing |
| Product colour | Transparent, white, black, or matched to your sample |
| Absorbent pad | One layer, absorbs blood and water; custom printing available |
| Packing | 400 pcs per carton |
| Application | Meat tray and food tray packing — fresh meat, poultry, fish, seafood, produce and deli |
Features
- Three-layer construction — PP/PET top, PP with calcium carbonate in the middle, PP/PET base.
- Integrated absorbent pad — soaks up blood and drip so the product surface stays dry.
- MAP compatible — suitable for modified atmosphere packaging, so shelf life can be extended.
- Food-grade PP/PET — safe for direct food contact, BPA-free and odourless.
- High rigidity — a meat tray that holds its shape under load on automated wrapping and sealing lines.
- Liquid stays put — the pad locks moisture in the fibre instead of letting it run to the corner.
- Custom size, colour and depth — made to your drawing, with pad printing for your brand or weight band.
- PP, PET or self-absorbent — one tooling, three versions, so one carton serves the whole range.
Packing and Customization
Meat trays are packed 400 pieces to a carton as standard, with the carton count and pallet pattern confirmed per size at quotation. New sizes are cut to your drawing or to a sample you send, and the pad can be printed with your brand, a weight band or a cooking instruction. Colour is matched to your sample where the standard black, white and transparent range does not fit.
For the clear version, see our PET fresh tray; for other tray formats in the same range, see PP fresh trays and padded absorbent trays.
For a lighter tray at a lower unit cost, see our PS foam trays; for fruit that needs cavity cushioning rather than drainage, see the biodegradable foam fruit tray.






